steel cut wire shot
Product Detailed
steel cut wire shot
1)Use forshot blasting
2)High quality&strength steel cut wire shot
3)Good service
4)Iso9001&SAEstandard
steel cut wire
1.size:0.8,1.0,1.5,2.0,2.5
2.the enterprise standard ,iso9001
3.cleaning oxide,surface preparation
Steel cut wire of the main technical standards
According to the enterprise standard Q/TDUY01-2005
name | Steel cut wire | |
Chemical composition
| C | 0.55~0.80% |
Mn | 0.60~1.20% | |
Si | 0.17~0.40% | |
S | ≤0.04% | |
P | ≤0.04% | |
Average hardness | Conventional:35~45HRC (350~425HV) | |
Hardness deviation | Maximum error range is±3.0HRC or±40HV | |
Metallographic organization | Uniform tempering martensite | |
Minimum density (Alcohol replacement method determined) | 7.2g/cm3 | |
